I was suprised to find my local metal supply house (for welders,
blacksmiths, and industrial) had 20' chunks of tubing and pipe. If you can
wait a week or two they can have what you want brought in with their next
shipment. Then all you have to do is get it home :-).
73 and Good Luck,
Joe
----- Original Message -----
From: "Brian Maynard" <b.k.maynard@verizon.net>
To: <towertalk@contesting.com>
Sent: Saturday, September 10, 2005 1:39 PM
Subject: [TowerTalk] Source for 20' Mast
> Hi Folks!
>
> For reasons I would rather not recount, I have a bent mast. I ordered
> a replacement from HRO - a USTowers M-20R 2" O.D. x 20' reinforced
> galvanized mast - listing at $259. Turns out the shipping would run
> $600-900!
>
> My question is: What other options can I explore for masts of similar
> length & strength (I am 3 miles from the Atlantic Coast)? Are there
> other suppliers closer to Rhode Island?
>
> Thanks for any advice. 73, Brian, K1NW
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|