http://www.clrwtr.com/PDF/Entrelec/Entrelec-Tower-Obstruction-Lighting-Controls.pdf
List price is around 100 or so, street price about half that if I remember
correctly. Works
great.
They meet FAA standards, but I am not sure what standards you would have
to meet.
They also have real simple and easy monitoring gear also.
Don't take your organs to heaven,
heaven knows we need them down here!
Be an organ donor, sign your donor card today.
----- Original Message -----
From: "Roger Parsons" <ve3zi@yahoo.com>
To: <towertalk@contesting.com>
Sent: Wednesday, April 21, 2010 1:42 PM
Subject: [TowerTalk] Tower Lighting
>I have access to a 325' tower for my remote station, and like to assist the
>tower owner where possible.
>
> The tower lighting is controlled by a light sensistive switch working a
> relay which actually controls the lights. The relay controller appears to
> be home made and did have a large open frame relay in it - until the
> contacts completely disappeared! (The actual load from the lights is about
> 1200w on each of two phases.) I replaced the relay with a 30A contactor
> which I thought was overkill and it was fine for several years, but that
> is now getting unreliable. Clearly there is a pretty heavy switch on surge
> with incandescent lamps, but this must be true at all tower sites.
>
> What do the professionals do? (I suspect the answer to that is spend
> several thousand dollars with Cutler-Hammer.....)
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|