In a message dated 96-11-08 11:10:02 EST, you write:
> After talking with M2, we've tried various
> arrangments on the set screws including double set screws (one to lock
> the other in place), stainless steel machine screws with locking nuts,
> etc. None of these solutions have held up more than a few days.
>
> A good connection with the linear loading rods is obviously crucial to
> the operation of the antenna. Anyone out there have similar problems
> with the large M2 antennas which use linear loading?? Any solutions??
You'll have better luck with split bolts if this antenna uses linear
loading wires. I might even work on rods as well. You can get different
sizes at your local electrical supplier. They're usually brass or copper so
use a little anti-oxidant to help minimize the dissimilar metal problems.
Put two of them on per joint and those suckers won't ever loosen up.
73, Steve K7LXC
TOWER TECH -- professional tower supplies and services for amateurs
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P
|