You can increase the voltage handling capability of this
relay by modifying the mechanical travel limit when the contacts
are open. This gets the contacts 1/2 inch apart so that
very high voltages can be blocked. After doing this, the relay
might pull in slower but who cares? You can also weaken the
spring if necessary.
Rick N6RK
JMLTINC@aol.com wrote:
> Look at part number 7384K13 at _http://www.mcmaster.com/_
> (http://www.mcmaster.com/) for ideas. Depending upon the load and
> insertion point (voltage /
> current), they will work fine.
>
> -John, N9RF
>
>
>
> **************It's Tax Time! Get tips, forms and advice on AOL Money &
> Finance. (http://money.aol.com/tax?NCID=aolcmp00300000002850)
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|