On 12/4/2024 1:15 PM, Jim Lux wrote:
So the impedance transformation of the feedline is important to get the right
split of power between the elements.
Yes. I've used a 40M version of this design. Nice antenna.
Yeah, don't go adding length with the choke.
As I recall, the phasing lines are 50 ohms, in which case my designs
should be used with RG400, at the base of each element, and the
electrical length of the choke subtracted from the phasing lines.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|