Isnt the Ham 4 rated for 15sq ft mounted flatly on a plate inside a tower?
Mark
W0NCL
-----Original Message-----
From: Cqtestk4xs@aol.com
To: TOWERTALK@contesting.com
Sent: Fri, 21 Oct 2005 13:55:19 EDT
Subject: Re: [TowerTalk] Ham IV Rotor
Tim
Generally vertical weight is not the problem, especially if you use a thrust
bearing. By the time you would stress it by having too much weight, you would
probably overload the ten square feet it is rated for as a wind load.
Bill K4XS
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|