Towertalk
[Top] [All Lists]

Re: [TowerTalk] ProSistel ring rotators

To: towertalk@contesting.com
Subject: Re: [TowerTalk] ProSistel ring rotators
From: Richard Thorne <rthorne@rthorne.net>
Date: Sun, 25 Aug 2024 13:27:39 -0500
List-post: <mailto:towertalk@contesting.com>
Fred,

The solution to the direction indicator issue is to use a Rotor Genius
from 4O3A.  It uses an electronic compass mounted to the aluminum boom
of the yagi your turning.  All you need at that point is to turn the
motor on and off so you can turn it CW or CCW.  The Rotor Genius handles
this nicely.

I just installed a Rotor Genius to control an Orion and Prop Pitch.  I
was able to successfully turn both rotors this morning.

Next weekend I'll climb the towers and install the compass's.  A Rotor
Genius can handle two rotors.

There is a nice windows app that controls the rotors with a click of the
mouse.

I'm all glass panel these days, no need for a rotor control box or an
antenna switch box as I use a pair of 4O3A Antenna Genius switchs.

One of these days I'm going to install a currently horizontal HDX-589
crank-up.  I'd like to install a ring rotor on top of one of the lowers
sections for an additional antenna.  I'm paying attention to any posts
concerning ring rotors.

Rich - N5ZC




On 8/25/2024 1:11 PM, Fred KG9X wrote:
Jon,

     Really appreciate your comments on TT about the RR55.  I have a
question about the capability of the RR55.  On the ProSistel page it
lists the max weight at 45 kg and max wind area at 1.5 m2.  I have a
C31XR JK version antenna on a Rohn 55G at 50'.  It's rated at  110# / 50
kg and 18.6 f2 / 1.73 m2.  These numbers are just a bit outside of their
ratings.  In your opinion, do you think their ratings might be a bit
conservative and I would be OK with this combination?

     The reason I'm asking is that I have been dealing with a TIC ring
that can't seem to handle this antenna in the wind.  I have been in
contact with Carl at TIC for nearly a year now asking for a solution.
The motor he uses is too wimpy and the motor and direction indicator
gears keep losing contact with the ring making it go out of calibration
or give a "no motion" indication on the controller.  He says he has a
solution for both issues but nothing has been sent my way.  It's always
excuses that he needs a bit more time.  The RR55 looks like a good
option.  How responsive is ProSistel to issues and delivery?

     TNX es 73,

         Fred    KG9X


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>