I believe those are passive boxes, not DSP (somebody please correct me
if I am wrong). They work fine, but are pretty expensive.
Dave AB7E
On 8/17/2025 1:34 PM, Jim Brown wrote:
On 8/17/2025 1:11 PM, Jim Lux wrote:
I’m not sure the RSPduo actually allows synchronized samples.
The DX Engineering NCC-1 and NCC-2 are excellent phasing boxes for use
on 80M and below. I'm using one with a pair of VE3DO loops spaced 5/8
wave on 160M, with feedlines of approximately equal length. Measured
complex responses for 160, 80, 40, 20, and 10M are in
http://k9yc.com/VE3DO.pdf The unit is quite well-behaved at 40M and
below.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|