Thank you, Charlie,
No the receiver is not picking it up. You can actually feel the controller
cases vibrating. I'll check the connections while at the remote.73 K5XM
On Wednesday, December 4, 2024 at 09:57:07 PM UTC, <n0tt1@juno.com> wrote:
Do you mean a buzz in your receiver?
If it's your receiver while operating the rotator...I had such a problem
quite a few years ago. I ended up "floating" the ground (common)
connection
in the rotator controller, i.e. no connection to the chassis in the
controller.
The only connection to ground/earth was then in the rotator itself.
With yours being an intermittent problem, I'd look for a loose or
corroded connection
somewhere in the wiring as you said.
73 Charlie, N0TT
On Wed, 4 Dec 2024 20:04:17 +0000 (UTC) trentkd5ia--- via TowerTalk
<towertalk@contesting.com> writes:
> The rotator controller at my remote station has developed an
> intermittent buzz. The rotator is a Ham-2, and the buzz occurs in
> its original controller as well as a Green Herron RT21, which
> probably means it's either in the wiring or the rotator itself.
> Any thoughts? Thank you! Trent K5XM
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|