Towertalk
[Top] [All Lists]

Re: [TowerTalk] Experience with crank up towers

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Experience with crank up towers
From: Clay Autery <cautery@montac.com>
Date: Wed, 7 Jun 2017 08:47:38 -0500
List-post: <mailto:towertalk@contesting.com>
KF7P, yes... Chris's stuff looks fantastic.  Thanks for the tip.
Yes, the Times part numbers ending in -DB for direct burial are UV
resistant...  NO cable stock that I am aware of is UV proof...  :)

73,

______________________
Clay Autery, KY5G

On 6/7/2017 6:40 AM, WK1W-Ivan Shapiro wrote:
> K47P makes agreat standoffs.  I bought a set for my UST.
> Regarding keeping coax off the ground:  I use "split=loom"....spelling, like
> used in automobile engines to protect wires.  Kf7P's standoffs have more
> area within so more coax and other wires can be put in.  The black
> split-loom hold 4 LMR400s=ultraflex, control wire for rotor, cat5-e for
> camera control, "siamese" cable (18-2 forn 24VAC for camera power and 75 ohm
> for analog camera feed.  One more thing: protects the coax from UV, though I
> understand that BURYFLEX is not UV sensitive (have not used it yet, only
> LMR400 UF.
> 73
> Ivan
> WK1W

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>