In the world of EMC, the usual formula for the far feild is anything beyond
lamda / 2*pi. Some say 1/2 wavelength or more. Take your pick.
Bruce K0SON
----- Original Message -----
From: "Steve Hunt" <steve@karinya.net>
To: <towertalk@contesting.com>
Sent: Sunday, September 21, 2008 12:50 PM
Subject: [TowerTalk] Near field Far field
> When I'm making Far Field measurements on an HF antenna - for example
> plotting its azimuth pattern by rotating it whilst measuring relative
> field strength at a remote point - how far away do I need to be to
> ensure I'm in the Far Field?
>
> Clearly there isn't an abrupt transition from Near Field to far Field,
> but some references seem to quote [2* D*D/Wavelength] as a transition
> point, where D is the maximum dimension of the antenna. So, for a point
> source the answer is zero, which sounds right. But for a 20m half-wave
> dipole the answer would be about 32ft which sounds a bit close in. For a
> mini-beam such as the MA5B the prediction would be even closer - about
> 9ft.
>
> Does this sound right? If not, what is the right formula?
>
> 73,
> Steve G3TXQ
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|