Hi again Bruce,
Yes, the stock Rohn shelf is easily cut with a fine tooth blade and a
jig saw. Likewise, boring new holes is easily done with standard
metal cutting drill bits.
I can send you a drilling template for the Yaesu rotor bolt pattern
if you need one. I believe the factory holes are for Hy-Gain rotors.
My drill template includes those too, so you can align the template
on the shelf using the Hy-Gain holes as an aid.
At 11:00 AM 3/15/2006, you wrote:
>Message: 1
>Date: Wed, 15 Mar 2006 08:49:27 -0600
>From: "Mike Bragassa, K5UO" <bragassa@consolidated.net>
>Subject: [TowerTalk] Yaesu Rotor/Bearing
>To: <TowerTalk@contesting.com>
>Message-ID: <008701c6483f$a92bd740$6400a8c0@MAIN>
>Content-Type: text/plain; charset="iso-8859-1"
>
>I think these types of rotors; very much like the Create rotors
>which are worm-gear driven, requires that the vertical loads be put
>on the rotor and not relieved by a bearing. Confirm that in your manual.
>Mike, K5UO
>
>
>Hello.
>Can the Rohn AS25G accessory plate be cut easily and with what type of saw?
>Without sacrificing strength can a Yaesu rotor GS-450 be mounted on
>a cut plate? I will be using a thrust bearing (TB3) for the vertical
>load. Does the AS25G accommodate the Yaesu rotors without having to
>re-drill mounting holes?
>Thanks
>Bruce
>K4BOF
Thanks,
Robin Midgett K4IDC
615-322-5836 office - rolls to pager
615-835-7699 pager
615-301-1642 home
K4IDC@comcast.net
http://www.people.vanderbilt.edu/~robin.midgett/index.htm
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|