Towertalk
[Top] [All Lists]

Re: [TowerTalk] Laws of Physics Repealed!

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Laws of Physics Repealed!
From: David Gilbert <xdavid@cis-broadband.com>
Date: Fri, 23 Oct 2015 13:32:16 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>

Uhh ... MFJ owns Cushcraft now.

'nuff said

Dave   AB7E



On 10/23/2015 1:13 PM, Donald Chester wrote:
First there was the Gotham Vertical.  Then the infamous Max-Com automatic 
antenna matcher.  Now, Cushrcaft is in on the action.

"R9"
  vertical.  Low angle radiation gives incredible, easy, world-wide low
band DX on 75/80m and 40m, plus it covers 30 through 6m with low
VSWR on all bands, with broadband matching transformer; no antenna tuner
needed. Low profile blends inconspicuously to keep your HOA happy.  31.5
  ft tall.  Best of all, NO RADIALS NEEDED!!!

  Only $639. Just plug in your plastic radio and talk, talk, talk!

See November, 2015 QST, page 2.

Amazing
  that hams (or maybe I should say HAMs) swallow that crapola.  31.5 ft
is only an eighth wavelength on 75/80m. The base impedance of a 1/8
wavelength vertical is about 12 ohms. No matter how much gimmickry such
as stubs, loading coils, toroidal transformers and porcupine spikes are
added, that thing will basically be a dummy load unless it is used with a
  SUBSTANTAL radial ground system.  A couple of 8' ground rods won't cut
it.

I had always considered Cushcraft, which has been in the business for decades, 
a reputable outfit, but this makes me wonder.


Don k4kyv
                                        
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>