Thanks info guys.
Having an interesting time determining clamp size for T1200. It has an
OD of .17". It seems that an 1/8" (.125") clamp would be too small.
That leaves only 5/32" (.156") clamps if they exist.
On 8/30/2012 12:34, john@kk9a.com wrote:
Phillystran compresses a lot, so I use a slightly smaller cable clamp than
the actual cable size. If I recall correctly, HPTG-2100I is .22 diameter
and I use 3/16 clamps. HPTG-4000I is .30 diameter and I use 1/4 clamps. I
only use cable clamps on boom trusses, where Big Grips are not practical.
John KK9A
To: towertalk@contesting.com
Subject: [TowerTalk] u clamp sizes for phyllistran?
From: Brian Alsop<alsopb@nc.rr.com>
Date: Thu, 30 Aug 2012 11:50:43 +0000
Guys,
I have various pieces op phyllistrad and wish to use it for boom support
and other purposes.
Need to know the proper size U clamps for:
T1200
HPTG 2100I
HPTG 4000I
I haven't had any luck determining the dimensions of the various U
clamps. For example just what dimension is 3/16 on a 3/16" clamp?
Yes I know about big grips. There appear to be none for T1200.
73 de Brian/K3KO
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2197 / Virus Database: 2437/5235 - Release Date: 08/30/12
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2197 / Virus Database: 2437/5235 - Release Date: 08/30/12
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|