Thanks Steve.
I'll take a look. I've heard RF Connection mentioned before.
73, Mike
On 4/11/2011 5:21 PM, Steve Katz wrote:
> There are different size pin type N crimp connectors available.
> Bury-Flex, like LMR400 and 9913 etc. has an oversized center conductor
> that takes a pin with a larger opening.
>
> If you look here and scroll down to item #11101400, that one works fine
> for this: http://therfc.com/n.htm
>
> WB2WIK
>
>
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of Alan NV8A
> Sent: Monday, April 11, 2011 1:57 PM
> To: towertalk reflector
> Cc: nf4l@nf4l.com
> Subject: Re: [TowerTalk] Crimp on Type N
>
> On 04/11/11 01:34 pm, Mike wrote:
>
>> What's the secret for getting the center pin of a crimp-on type N
> connector onto the
>> center conductor of Bury-Flex? Is it OK to clip a couple of strands?
> Are you sure they don't make different versions of the connector for
> cables with different center conductors? I recently used a bunch of
> clamp-type N-connectors (bought on ebay) on Bury-Flex and the center
> pins fitted perfectly. But I later bought a couple more at a hamfest and
>
> had to cut off some strands.
>
> 73
>
> Alan NV8A
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|