John,
There is only one commercially available "band decoder" that will
switch antennas *within* a band ... that's the microHAM Station
Master. Any of the other switches decode the band based on a
BCD "band number" (e.g., Yaesu) or a stepped voltage (e.g., Icom).
Station Master uses the transceiver computer control interface to
query the operating frequency and make antenna/band decisions
based on the frequency. More information - including the manual -
is available at: www.microHAM-USA.com/products.html.
Station Master easily provides automatic band segment switching for
antennas with relay segmentation - like many of the loaded yagis
for 80/75 and 40 meters or coil loaded/matched verticals ...
73,
... Joe, W4TV
On 9/10/2010 4:38 PM, johne tds.net wrote:
> Has a frequency determined antenna switch been developed ? I have RSD
> in my hands and rotating the antenna switch is getting to be a
> problem.
>
> I have looked at band data controlled switch's and like most hams and
> I have multiple antenna for different parts of the band.
>
> Looking for a antenna switch that will determine the radios frequency
> and then switch to a pre-programmed antenna for that frequency , This
> would allow multiple antennas for each band.
>
> Any thoughts? de John K0CQW
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|