Towertalk
[Top] [All Lists]

Re: [TowerTalk] Crimped Electrical Connections

To: John Simmons <jasimmons@pinewooddata.com>
Subject: Re: [TowerTalk] Crimped Electrical Connections
From: Martin Flynn <maflynn@theflynn.org>
Date: Wed, 17 Nov 2021 11:52:35 -0500
List-post: <mailto:towertalk@contesting.com>
Search for Amp “pidg” terminals

Solistrand 





Sent from my iPhone

> On Nov 17, 2021, at 11:37 AM, John Simmons <jasimmons@pinewooddata.com> wrote:
> 
> Following this thread. I was unable to find the lug rated for solid wire. 
> I'd like to have this in my reference. Cat #?
> 
> 
> -- 
> 73,
> -de John NI0K in rural Debs, MN USA
> 
> Paul Christensen wrote on 11/17/2021 10:32 AM:
>>> "For instance T&B CTL "copper one hole lugs, short barrel" are for "AWG 
>>> stranded, flexible cable, welding cable, and portable cord."  You have to 
>>> hunt way down to find something designed for solid conductors."
>> Good point, Jim.  Yes, #10 solid-wire Romex.  See links below.  This is what 
>> I recently ordered from Mouser.  These lugs have a tongued body which mate 
>> nicely with the prop pitch's electrical barrier strip.  However, not sure if 
>> it's rated for solid or stranded #10 AWG.
>> 
>> https://www.mouser.com/datasheet/2/418/7/ENG_CD_327960_K3-2062872.pdf
>> 
>> https://www.mouser.com/ProductDetail/571-2-327960-1
>> 
>> Paul, W9AC
>> 
>> _______________________________________________
>> 
>> 
>> 
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>