Skip, that's useful information. My rotor was obtained new about two
weeks ago and the schematic identifies P13 as NJC-207-PF, and that's the
same number that was in the correspondence from W9AE. His
correspondence was a couple of years old though. And it wouldn't be the
first time that manuals weren't kept up to date.
Anyhow, in my case, both the original and replacement plugs were
Nanaboshi, but there was no part number shown. I can't find the packing
slip, but I don't think it showed the Nanaboshi number on it; just the
Yaesu part number.
73, Joe
KJ6Y@aol.com wrote:
> To all concerning the Yaesu connector on the rotor. Early version of the
> Yaesu rotor used a different connector that the later version (I believe it
> was
> the SDX ). They looked dimilar but the early versions were smaller.
>
> Skip, KJ6Y
> _Communications Service Co_ (http://members.aol.com/kj6y/skip.html)
> 818-887-3569
>
>
>
>
> ************************************** AOL now offers free email to everyone.
> Find out more about what's free from AOL at http://www.aol.com.
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|