I have a recently-installed Force-12 LPT-1242 with the Hidden Cable option.
The combination appears to have a problem that prevents the tower from
getting higher than about 25', or 35' if I take extra steps to work
around the problem.
I would like to hear from anyone else who has the LPT-1252 with the
Hidden Cable option, and not the motorized power winch.
I searched the archives and found one message referring to the winch,
but it doesn't mention this problem.
http://lists.contesting.com/archives//html/Towertalk/2005-11/msg00376.html
Here is the problem:
(Please refer to this factory photo:
http://force12inc.com/LPT-new-hidden-2.JPG)
When the cable winds to the right side of the winch, the cable binds
against the small square tube that hides the cable.
I can get past that point either by force (which I find worrisome) or by
putting a bushing against the right side of the winch to reduce the travel.
Not having metalworking facilities, I'm again not comfortable with the
bushing I've made, and also the manufacturer's site recommends reducing
the number of winding layers, and this would increase them.
When the cable travels back to the left side again (which happens sooner
with the bushing on the right now), the cable binds against the winch's
own worm gear.
A bushing on the left side would again reduce travel and increase
winding layers, but would also have the problem that it would either
displace or cover the initial 3 turns of cable that set the tension, as
the cable starts on the left side.
I've turned the crank as much as I feel comfortable with with the cable
rubbing against the worm gear, and the maximum height I get is 34ft,
leaving me 10 more feet to go.
73,
Leigh/WA5ZNU
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|
