-----Original Message-----
From: Dubovsky, George
Sent: Monday, June 09, 2008 2:48 PM
To: 'Roger (K8RI)'
Subject: RE: [TowerTalk] Hindsight: Check your rotator bolts
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of Roger (K8RI)
> Sent: Monday, June 09, 2008 2:04 PM
> To: Tower Talk
> Subject: Re: [TowerTalk] Hindsight: Check your rotator bolts
>
> Dubovsky, George wrote:
> >
> >
> > If you think about it, this accomplishes nothing that a bolt would
not
> > accomplish in the same application.
>
> Yes it does.
No, it doesn't. So, there... ;-) My bolt has exactly the same holding
force on the lockwasher/captive plate as your double nut scheme does.
You claim the second nut keeps the first nut from loosening; the head of
my bolt never changes its orientation to the threaded section, so it
never "loosens" either. If my bolt loosens from vibration, so does your
scheme. Check your mechanics again.
> > The second nut does nothing more
> > than make the first nut "thicker".
> A thicker nut and two nuts "locked" or jammed together are quite
> different in the way they work.
> A thicker nut or rather one twice as thick (two nuts) offers twice the
> area as do two nuts, but the two nuts work against each other by
> preventing each other from turning. The thicker nut does not.
> > If a properly sized bolt with a good
> > lockwasher under the head is not going to hold, than neither is an
> > improperly sized (long) bolt with two nuts forming a new "head"
further
> > down the shank of the bolt.
> The mechanics of the two are quite different as is the purpose. The
> problem is not holding, the problem is the bolt coming loose.
> Again two different problems although if a bolt comes loose it won't
> hold, not holding doesn't necessarily mean coming loose. IOW the one
> can break where the other just vibrates loose.
> > The second nut only guarantees that your new
> > "bolt head" doesn't move on the threads of the bolt, but the head on
a
> > hex-head cap screw already has that feature manufactured in.
> >
> >
> Both serve as "heads", but only one serves as a lock.
> The "jam nut" is not nearly as simple as it sounds.
>
>
> Roger (K8RI - ARRL Life Member)
> www.rogerhalstead.com
> N833R (World's oldest Debonair)
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
------------------------------------------------------------------------------------------------
This message is for the designated recipient only and may
contain privileged, proprietary, or otherwise private information.
If you have received it in error, please notify the sender
immediately and delete the original. Any unauthorized use of
this email is prohibited.
------------------------------------------------------------------------------------------------
[mf2]
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|