In a message dated 4/3/2005 8:52:47 AM Pacific Daylight Time,
towertalk-request@contesting.com writes:
Fairly simple solution. I believe the boom on this antenna is 3". Get
2 3" muffler clamps and install them in such a manner that the center
of balance is displaced to that of the original configuration. Now,
some heavy duty rope tied around the outsides of the clamps and
connected to a pully of sufficient strength can be used so loosen the
mounting clamps. During this process, if balance is not achieved,
simply tighten the bolts again, and move one of the 3" muffler clamps
to compensate.
Huh?!? Could you explain this so I can understand it? Where do the
muffler clamps actually go? What is "such a manner"? Where does the rope go?
Where
does the pulley go? More specifics appreciated.
Cheers,
Steve K7LXC
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|