Towertalk
[Top] [All Lists]

Re: [TowerTalk] Wire for Quad

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Wire for Quad
From: "larryjspammenot@teleport.com" <larryj@teleport.com>
Reply-to: "larryjspammenot@teleport.com" <larryj@teleport.com>
Date: Tue, 19 Jun 2007 14:44:06 -0700 (GMT-07:00)
List-post: <mailto:towertalk@contesting.com>
I lost a few of mine when I took down my LB Quad to move to a new QTH. If 
anyone has any spares of these wire-to-spreader fastners, I could sure use a 
few. I could also use a few spreaders, that got damaged.

LJ



-----Original Message-----
>From: "Joe Giacobello, K2XX" <k2xx@swva.net>
>Sent: Jun 19, 2007 1:54 PM
>To: Bill Turner <dezrat@copper.net>
>Cc: towertalk@contesting.com
>Subject: Re: [TowerTalk] Wire for Quad
>
>Mike, the owner of erstwhile Lightning Bolt, had solved this problem by
>designing a wire-to-spreader fastener that consisted of several short
>pieces of concentric heavy walled synthetic tubing of some sort (I
>believe the outer tubing was truck air brake lining.).  The tubing
>assembly was mounted on the band of a hose clamp by another short piece
>of concentric tubing, if I recollect correctly.  The flexible concentric
>tubings were mounted to the spreaders with the hose clamp and the quad
>wire passed through the  tubings.  It made for a nice neat, taut
>assembly and the positions of the wires could be adjusted easily by just
>moving the hose clamp and without drilling holes.  They worked and
>continue to work very well.
>
>His wife used to make them up for him and he sold them for about
>$1.50-2.00 each.
>
>73, Joe
>K2XX
>
>Bill Turner wrote:
>> ORIGINAL MESSAGE:
>>
>> On Mon, 18 Jun 2007 23:05:51 -0400, "Bob Maser"
>> <bmaser@tampabay.rr.com> wrote:
>>
>>   
>>> Teflon covered stranded is used by many.  How you fasten it to the 
>>> spreaders 
>>> is VERY important.
>>>     
>>
>> ------------ REPLY FOLLOWS ------------
>>
>> Interesting thought about the Teflon. 
>>
>> And fastening is indeed important. Ideally you want some kind of
>> strain relief so the wire does not flex from a hard point. How you do
>> that, I'm not sure other than making the holes through the spreaders
>> with a gentle curve as opposed to a sharp edge. 
>>
>> I had a four element quad up for six years and it was a fantastic
>> performer, but when the wires started breaking I took it down and put
>> up a triband yagi with a single feedline and no moving parts. It does
>> not play as well but it's good enough and I sleep better. 
>>
>> The Alpha 89 helps too. :-)
>>
>> Bill W6WRT
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>>
>>   
>
>
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>