Hi,
I am about to improve my radial system for the combined 130 feet vertical
for 160m
and 80 m 4 SQ ( design from ON4UN's low band DX ing 4th edition 11-72 ).
My thought was to
lay 4 quarter wave stripes of zinc coated mesh ( 1 m wide with 25 mm
aperture )
from the foot of the tower under the 4 verticals of the 80m 4 SQ.
Can this improve the performance of the existing ground system of 64 40m
long radials ?
Any hint is highly appreciated.
73 ! Daniel / OK1DIG
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|