Towertalk
[Top] [All Lists]

Re: [TowerTalk] LOOKING FOR A USED CRANK UP SELFSUPPORTINGTUBULARTOWER

To: "'Jim McDonald'" <jim@n7us.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] LOOKING FOR A USED CRANK UP SELFSUPPORTINGTUBULARTOWER
From: "K6XN" <k6xn@comcast.net>
Date: Wed, 1 Feb 2006 08:46:49 -0800
List-post: <mailto:towertalk@contesting.com>
Jim

I recommend you contact US Tower directly or check their website. The bolts
they sent me last year for another MA-770 installation were straight bolts
and only 1 inch by 27 inches rather than the 1 inch by 36 inch bolts already
installed at the Nevada site.

Thanks and 73, Ted, K6XN

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Jim McDonald
Sent: Wednesday, February 01, 2006 8:32 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] LOOKING FOR A USED CRANK UP SELF
SUPPORTINGTUBULARTOWER

Doesn't US Tower require J-bolts, rather than straight bolts? 


Jim N7US 



>  I am looking for a used self supporting crank up tower to  install at 
> a
location in Nevada for contesting. I already have in place 10  cubic yards
of steel reinforced concrete with 1 inch diameter by 36 inch  long anchor
bolts imbedded in the concrete. The anchor bolts are spaced 9  inches apart
which will accommodate a US Tower tubular tower Model MA-770  with the
MARB-770 free standing Rotor Base and the early Tristao 70 +/-  foot crank
up tubular towers.

>  Are there other towers  which would accept an anchor bolt pattern of 
> four
one
inch diameter anchor  bolts spaced 9 inches apart? 
 
Hiya, Ted --
 
    I wouldn't worry about the bolt pattern. The  existing bolts can be
chopped off with a hand grinder and then you can  rent a drill with a
concrete bit or a hammer drill to drill new holes.  Epoxy in the new anchor
bolts and you're good to go. Construction guys do this  all the time and it
works great. When you're done, the epoxy is typically  stronger than the
concrete. 
 
Cheers,
Steve   K7LXC
TOWER TECH -
Professional tower services for amateurs
Cell: 206-890-4188


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>