Towertalk
[Top] [All Lists]

[TowerTalk] cross booms for vhf/uhf antennas

To: <towertalk@contesting.com>
Subject: [TowerTalk] cross booms for vhf/uhf antennas
From: wklinn@hotmail.com (Wally Klinger)
Date: Mon, 17 Aug 1998 10:48:12 PDT
Good morning,

I am in the process of putting up a new tower, and have a question. I 
intend to put up a 13 el 2 meter FM cushcraft ans 15 el 220 FM cushcraft 
on the tower.  To save space (and maximize the height) I want to use a 
crossboom. I was thinking of 10 feet of 1 1/2 inch galvanized water pipe 
(with appropriat mast to cross boom plate) This would give me 5 feet of 
separation from the mast on either side, and 10 feet from each antenna 
respectfully. Is this a good idea? Too long?? Not the right type/grade 
of pipe?? Any better ideas?? Apparently KLM sells a 7 1/2 foot 
fiberglass cross boom (used by the OSCAR guys) Which I surmise would be 
lighter. Is there enough separation here?? Or should I stay with my 
origional idea?

The plan this saturday is as follows.....

Discone at 85 feet
Below it crossboom w/ 2 meter and 220 beams vertical polarization
JUST below it 6 el 440 FM beam mounted on main mast
Below this 4 el hygain 6 meter beam
Below this at roughly 71 or 72 feet, TH11DXX

Hope it stays up!

Let me know what you think!!

73's
Wally W9BEA
Wklinn@hotmail.com

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>