Towertalk
[Top] [All Lists]

[TowerTalk] Force12 EF-240s problems....

To: <towertalk@contesting.com>
Subject: [TowerTalk] Force12 EF-240s problems....
From: sm5dqc@algonet.se (Osten B Magnusson)
Date: Thu, 24 Jul 1997 03:20:51 -0400 (EDT)
Last Sunday I sent the e-mail below to Force12, but no reply sofar.
I would like to have the antenna going before IOTA-contest coming
weekend. Anyone who had the same problem (and fixed it) ????

73/DX de Osten / SM5DQC       e-mail:  sm5dqc@algonet.se


To customers service dept. (That=B4s probably Tom, N6BT, sorry to
bother you Tom).

First the story:

I bought an EF-240s from Sam, SM3PZG (Leges Import) in early May
and had problems tuning it (assembly was VERY easy), I got the low
1:1 SWR very broad but around 7180 KHz even though I did set it up
for 7030 KHz according to the manual. The antenna is on a heavy steel
carnk-up, tilt-over lattice tower, and have to tilt it up and down when
adjustements are made. Finally with the driver jumpers at 8 inches from
center I got it down to 7005 KHz, but very narrow bandwith SWR.=20
Unfortenately I had the loading wires streched to much and, YES I did
cut them........ The beam worked fine on 40 CW with FB etc. but did
look awful. Ordered new loading lines wires from SM3PZG and got them
a week ago. Today I had the beam down, changed loading lines and now
the beam looks great BUT again with driver jumpers at 12 inches from the
center I have 1:1 SWR from 7160 to 7175 KHz.


Second, what to do:

What have I done wrong ????? As I have mounted the antenna this time
precisely according to the manual, someone else must have had the same
problem ????? If I adjust the driver jumpers to get down again to the DX-
frequency 7005 KHz, what happens if I still keep the reflector jumpers at
5 inches from center, that is FB etc. ????

Seems my manual is from 1995 (dw240sn3.002), any modifications since
that time ????

Thanks in advance for your answer. I was very pleased with how the antenna
works at 65 feet, worked all DX I could hear, but now after I installed the new
loading wires I will leave the antenna until I get an answer. It might be=20
simple,
I am a DX=B4er, not an antenna engineer.......


73/DX de Osten / SM5DQC        e-mail:   sm5dqc@algonet.se




--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search
ÿÿ    [TowerTalk] Force12 EF-240s problems....

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>