Jim Lux suggests:
>For instance, you could take the existing tuner Bud is using, put it
>in a weather proof enclosure, add some servos or steppers, etc. But
>that's probably more of a pain than just running the openwire line.
I dunno, that's what I did. Granted, I had a balcony with a roof to
limit the amout of weatherproofing that I had to do, but the servo
thing was cheap and fairly reliable, even though it was a pretty ugly
hack the first time. In my case, I had to run all feedlines out under
the balcony door so ladderline wasn't an option. (And yes, I had
noticeable feedline loss on some bands with coax, even with a 20' run
!!)
http://www.n3ox.net/projects/servo
I've upgraded my technique a bit for an antenna that doesn't change so
much. Having the T-match tuner was very useful when I was shooting
random lengths of magnet wires into trees to replace the ones that
break. I decided I liked fast band switching better than ease of
initial setup and came up with the matching for this:
http://www.n3ox.net/projects/sixtyvert
The latter one is probably *not* good to 1500W on all bands just
because I was using a smallish wafer switch and haven't bothered to
check component ratings, because I just run 100W. Still, it would be
a snap to size everything for 1500W. Not cheap.
My 80m networks would probably take full legal limit with a switch
upgrade. 40m might but I don't know what my cap is good for,
voltagewise, and it's an end-fed near-halfwave.
Cecil's ladderline approach is good too, and if you're already
thinking ladderline, it's easy to implement.
73,
Dan
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|