The ones on my tower have a slightly bowed area that fits around where the
diagonal brace meets the leg. Once in place, it can't go very far up or down
within hiting the bracing itself. If your was reversed, that might cause the
problem.
Frank
W2FCA
"Mike Gilmer, N2MG" <n2mg@eham.net> wrote:
>That bracket sounds like a standard Rohn bracket. When installed (properly),
>it should nestle in the Z-braces and not have any room to slip down.
>
>Mike N2MG
>
>NA9D wrote:
>
>> One thing I noticed was that the guy bracket had literally slipped
>> downward slightly on one of the guys. ?I thought I had gotten it
>> tight, but apparently that was not the case.
>
>
>
>
>_______________________________________________
>Self Supporting Towers, Wireless Weather Stations, see web site:
>http://www.mscomputer.com
>Call 888-333-9041 to place your order, mention you saw this ad and take an
>additional 5 percent off
>any weather station price.
>_______________________________________________
>Towertalk mailing list
>Towertalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
|