The 1000/2700/2800 sdx boxes are generally interchangeable, with one minor
exception. The 1000sdx doesn't have the automatic slowdown before the hard
stops.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: Doug Rehman [mailto:doug@k4ac.com]
> Sent: Friday, October 01, 2010 14:22
> To: towertalk@contesting.com
> Subject: [TowerTalk] Yaesu GS-23
>
> Does anyone have a manual for the Yaesu GS-23 RS-232 board for the SDX
> series rotator controllers? I found a text only version of it online, but
> that doesn't help with figuring out the baud rate setting which is
> apparently in an illustration.
>
> Also, can anyone confirm that the same transformer is used in the G-
> 1000SDX
> controller as the G-2800SDX controller?
>
> I have a G-1000SDX box to use with a 2800 rotator; the 1000SDX transformer
> appears to be the same size as the one in an older 2700S box and is about
> twice the size of the one in an 800SDA box. Interestingly, the 800SDX
> transformer appears to be the larger one as well; did Yaesu start putting
> smaller transformers in the SDA boxes?
>
> Thanks,
> Doug
> K4AC
> Running for ARRL SE Division Director
> Campaign Website: www.k4ac.com
> Campaign Blog: www.k4ac.net
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|