Hello Guys,
In addition to what Tom is saying, this also happened to me. I did as Tom
suggested PLUS I got some teflon tape from local plumbing supply and wrapped
that around the U where it might "see" the aluminum through the gap in the
PVC. No problems ever since.
73 Tom K6CT
>The PVC insulator has arced over to the U-bolt holding the element. The
slot
>in the PVC should be aligned with the gap between the U-bolt and the
element
>to boom plate. This is the largest air gap and prevents such an occurance.
>The PVC is right within reach. It might be possible to clean it and rotate
>the slot to the gap. If necessary, new insulators can be added without
>removing the element (or antenna).
>
>If you would like new insulators, please respond to this e-mail address and
>it should rach me!
>
>
>
>Have a good day and 73,
> Tom, N6BT
> Force 12 Antennas and Systems
> (Home Page http://www.QTH.com/force12 )
>
>
>
>
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|