Hi
Check out this page on the Force 12 web site:
http://force12inc.com/F12-ele-ex-r1-0.htm
Describes the method recommended by Force 12.
73s de Ed, AD5JV
----- Original Message -----
From: <Berggrent@aol.com>
To: <towertalk@contesting.com>
Sent: Sunday, January 23, 2005 9:04 PM
Subject: [TowerTalk] Force 12 Antenna Disassembly
> I am going to take a Force 12 antenna apart. To remove the rivets, do I
just
> use an 1/8 inch drill bit or should I start with a smaller bit first?
What
> helpful hints have you so that I don't screw up the aluminum holes or make
it
> difficult for the next guy to put things together? Many thanks. 73 Tommy
WE7K
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|