Dwayne,
I use the RF Industries RFU-507-SI connector on LMR-400UF all the time. Never
had a problem with the center conductor.
Shea
Offshore Outfitters
-----Original Message-----
From: towertalk-bounces@contesting.com [mailto:towertalk-bounces@contesting.com]
On Behalf Of DMartin560@aol.com
Sent: Wednesday, November 28, 2007 2:12 PM
To: steve@oakcom.com; towertalk@contesting.com
Subject: Re: [TowerTalk] LMR400-UF Crimp Connector ??
What does that connector fit?
A search on the RF Industries site can't find it?
Dwayne
RFC-1703-T
Steve K8LX
RICHARD SOLOMON wrote:
> What is the proper UHF Crimp Connector for LMR400-UF ?
> I have tried two, RFU507-ST and SI and find I have to remove
> two strands of the center conductor before it fits.
>
> Surely there must be a connector that fits ??
>
> Thanks, Dick, W1KSZ/7
**************************************Check out AOL's list of 2007's hottest
products.
(http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|