Anyone know what it takes to get equipment installed on cell towers or other
towers? Licenses? Certifications?
Looking to get some equipment installed on some towers in Miami, FL. Some
are buildings which I can do, and some are towers.
If you know how I can get this done - subcontracted, etc., please drop me a
line.
Thanks,
Chris
----------------------------------------------
Chris Hale
Peak Networks
16 Cassie Lane
Merrimack, NH 03054
http://www.peaknetworks.com
800-PEAK-987
chris@peaknetworks.com
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of K4BEV@aol.com
Sent: Sunday, February 23, 2003 11:16 PM
To: smillick@wamusa.com
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] switching
In a message dated 2/23/03 21:55:10 Central Standard Time,
smillick@wamusa.com writes:
> ....... I need a 6 wire switching unit........
Hi,
You can use an A/B (or even 3 or 4 position) data switch. Get the type that
switches parallel ports (25 pins). Parallel your high current wires using 4,
5, or more pins for each one.
You can get these pretty cheap on eBay, by the way.
Have fun,
Don - K4BEV
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|