The only answer possible on here... you need an engineer. One who really
knows what he is doing with towers.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of Paul Hemby
> Sent: Friday, July 13, 2007 21:27
> To: towertalk@contesting.com
> Subject: [TowerTalk] new tower
>
> I would like to install 170 feet of Rohn 45 tower. The problem is that
> the
> specs call for guy points to be 136 feet. My lot is only 170 feet wide
> which will give me about 96 feet on each guy point. Is there anyway to
> elevate the guy points enough, such as using H beam to make this work, or
> increasing the size of the guy cables, pouring additional concrete, etc,
> the
> tower can be bracketed to the poured concrete bond beam on a concrete
> block
> garage at 10 feet if this would help. Any help or ideas would be
> appreciated. Thanks Paul WN4AMO
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|