Dave-
I have had a good experience using K7NV's after-market mast clamp on my
OR2800 rotor. The mast provides much more surface area on the mast.
They're not cheap, around $250. Check out his website.
73,
Steve
N6SJ
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of John
Becker
Sent: Friday, December 20, 2013 4:18 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Slipp-Nott
> Tennadyne markets the Slipp-Nott.
> Does anyone on the reflector have real world experience using this >
item. Does it really work?
>
> 73
> Dave
> W1CTN
I had one and I had a very bad experience with it. When the mast slips in
the rotor but not in the Slipp-Nott sleeve, the resulting forces are
transmitted through the Slipp-Nott brackets to the rotor U-bolts. In my
case, this caused the U-bolts to fail, leaving the antenna totally free to
rotate in the wind. The Slipp-Nott brackets were totally mangled. On first
glance the Slipp-Nott seems to be a good idea, but when you analyze what is
going on it is a bad design IMHO.
73,
John, K9MM
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|