http://www.k1ttt.net/technote/yaesu.html#funnyspeed
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of Wayne Heil
> Sent: Saturday, August 18, 2007 19:56
> To: towertalk@contesting.com
> Subject: [TowerTalk] Yaesu G1000 SDX speed problem
>
> I am having a problem with bench testing a Yaesu G1000 SDX rotor I
> just bought used.. Everything works fine in the CCW direction.
> However in the CW direction, the speed control seems to have no
> effect. The rotation is at the slowest speed and when I
> stop the rotation, the compass needle jumps back a few degrees. Also,
> when using preset in the CW direction the control box starts making a
> continuous clicking sound (like a relay) when it comes to the preset
> point.
>
> Any suggestions on where to look for the cause.
>
> '73,
> Wayne, KB6OQJ
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|