Hi Robert
I am using a P80HD here which I brought from the UK. In the UK I had good
solid ground whereas here it is less so being a much more mobile substrate.
In both cases I have used about 2 cubic yards of concrete to good effect.
Here I drilled a hole about 8 feet deep and a little over 3 feet diameter.
I think you could get away with less but I guess it depends what you put up
top!
I have a Force 12 C31XR and 15 feet above that a Cushcraft XM240.
You didn't say whether your tower is a base plate or a post mount version.
Mine is a post mount.
73
Bob 5B4AGN/ZC4ZM
----- Original Message -----
From: "Robert Webb" <G0urr@btopenworld.com>
To: <towertalk@contesting.com>
Sent: Saturday, March 23, 2002 9:20 PM
Subject: [Towertalk] Installing a P60
> Hello everyone, has anyone got any advice for installing a Versatower P60.
> My ground is abt 3 ft of topsoil then very yellow sand from there on, if
> that matters.TIA
> Robert Webb
> G0URR
>
>
>
>
>
>
>
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
|