Bill,
One additional thing. After I got everything finished I was real concerned
about my grandkids hanging themselves on the bottom ends of the guy wires. I
noticed that the power company put some long yellow plastic "tubes" on their
ground wires on their poles. I called, got the phone number of their
supplier and bought six for the bottom two sets of guys. (The rep was a ham
and brought directly them to my house!!) This was a real good thing and has
saved "grandpa" several times while mowing the yard....the kids are smart
enough not to get hung up!
Bill W5VX
>-----Original Message-----
>From: towertalk-bounces@contesting.com [mailto:towertalk-
>bounces@contesting.com] On Behalf Of bill rubin
>Sent: Saturday, August 04, 2007 4:52 AM
>To: towertalk@contesting.com
>Subject: [TowerTalk] phillystran length ?
>
>I am planning to put up a 100ft rohn 45g with 3 sets of guys 1 at 94 ft. 2
>at 61ft, 3 at 31 ft.
>The antenna will be a steppir 3 ele. 6-20 meters and with 30-40 meter
>dipole option.
>also at the 85 ft level I plan on feeding my 80/160 fan dipole (inverted)
>
>Using a hybrid Phillystran 1/4 to EHS 1/4 configuration for the guys to
>reduce / remove guy resonance what should be the MINIMAL lengths be using
>the Phillystran ?
>
>Yes I know more is better, but budget wise i would like to know.
>
>Do I only need it at the top level ? Two levels ?
>
>Alternative if i use 502 insulators how many and where ?
>
>Thanks 73 N1HWC Bill
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|