I built a large quad with #12 copperweld...I wonder what the weight
difference is between the teflon coated stranded / solid, and #12 copperwed
(copper coated steel). I fugure the tefoln should offer some additional
fatigue resistance also.
Not sure about Ice buildup on teflon... but I think that freezing rain will
adhere to anything below freezing, and may not offer much in ice buildup
resistance. I know the water will bead on it... that maybe worse as the ice
may build up in a bumpy fashon... who knows???
----- Original Message -----
From: "Joe Giacobello" <k2xx@swva.net>
To: "towertalk reflector" <towertalk@contesting.com>
Sent: Friday, August 26, 2005 12:11 PM
Subject: [TowerTalk] Teflon Coated Wire for Quad Elements?
>
> Although very expensive, someone once suggested using teflon coated wire
> for quad elements. The objective was to minimize icing and snow
> buildup. Seemed like a reasonable idea, and I wonder if anyone has ever
> tried it?
>
> Incidentally, the lowest price I was able to find for #12 Teflon coated
> wire was $350/500 ft.
>
> 73, Joe
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|