Topband
[Top] [All Lists]

Re: Topband: RF choke/balun

To: Rob Atkinson <ranchorobbo@gmail.com>
Subject: Re: Topband: RF choke/balun
From: Charles Moizeau <w2sh@msn.com>
Date: Sun, 17 Sep 2017 01:42:52 +0000
List-post: <mailto:topband@contesting.com>
That could be true, but for several years my inverted L (86 feet up and 68 feet 
out, over 1.5 miles of in-ground radials) is significantly less noisy on 
receive than my 270-foot center-fed dipole sloping (intentionally) from 83 feet 
to 7 feet.


Your comments please.


73,


Charles, W2SH

________________________________
From: Topband <topband-bounces@contesting.com> on behalf of Rob Atkinson 
<ranchorobbo@gmail.com>
Sent: Saturday, September 16, 2017 8:40 AM
To: Arthur Delibert
Cc: topband@contesting.com
Subject: Re: Topband: RF choke/balun

Unless you like listening to noise you don't use an inverted L on 160
(or 80) for receiving.

Rob
K5UJ

On Sat, Sep 16, 2017 at 6:58 AM, Arthur Delibert <radio75a3@msn.com> wrote:
> I think that’s right if the only issue is your own transmit signal bouncing
> back from the antenna junction and traveling along the exterior of the
> feedline.  But for receiving, I think a choke at each end of the feedline is
> important unless you’re in an exceptionally low noise location.  K9YC
> recommends putting a choke at the antenna end of the feedline, and I’ve
> found it makes quite a difference in the amount of local noise on the
> received signal.  If I understand it right, the outside of the feedline
> picks up the noise signal and carries it to the antenna junction, from where
> it gets mixed in with the desired signal.
>
>
>
>
_________________
Topband Reflector Archives - 
https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.contesting.com%2F_topband&data=02%7C01%7CRaymondParkII%40msn.com%7Cab5896cef8ad4d8ce1d608d4fd0084cc%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636411626045596855&sdata=A99f%2FUw%2F7xMpBsGE08ZPLo0nLOMaD%2FeinwO1OCyCkWw%3D&reserved=0
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>