Hi Guys,
Here's another rather neat coaxial cable site allowing one to "...plug & play":
http://timesmicrowave.com/calculator/?productId=52
~73~ de Eddy VE3CUI - VE3XZ
On 2015-03-16, at 9:32 AM, mstangelo@comcast.net wrote:
> Rick,
>
> You can look at the attenuation on a data sheet.
>
> Here is an example of a Belden RG-11 type CATV cable. The center conductor is
> copper coated steel but the attenuation at 1Mhz is low:
>
> <https://edeskv2.belden.com/Products/index.cfm?event=showproductdetail&partid=7131>
>
> Since it is used the receiving it is only rated at 300v. I'd be concerned
> about transmitting with high power or a high SWR.
>
> Mike N2MS
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|