hi luc
so you use a hi z rx arrya and you have matched the 7m long radials with a coil
in resonaze?
VY 73
frank
-----Ursprüngliche Mitteilung-----
Von: luc kerkhofs via Topband <topband@contesting.com>
An: topband <topband@contesting.com>
Verschickt: Sa, 7 Jun 2014 9:13 pm
Betreff: Topband: Feedpoint of short RX vertical
Hello,
trying to improve my RX setup, I have a question .
When feeding short RX verticals with a coil and resistor in series, does it
make
sense to decouple the feedline
at the feedpoint with a braid breaker ?
73
Luc
ON4IA
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|