Hi Rune,
I found that if I used an insulated wire on the ground between the
termination point and the feed point and lifted the connections to the
ground rods the performance seems to improve compared to another EWE I put
up in the same direction. I guess it is kind of an off-center fed Flag
antenna.
The Pennants seem to be lower noise but of course less gain than the
off-center fed EWE and the regular EWE. I tend to use the Pennants more than
the EWES.
73,
N2TK, Tony
-----Original Message-----
From: topband-bounces@contesting.com [mailto:topband-bounces@contesting.com]
On Behalf Of La7tha
Sent: Wednesday, August 12, 2009 6:27 AM
To: topband@contesting.com
Subject: Topband: InfoK9AY Phased array and EWE posible problem.
Hi all
Thanks to all that have send me info about K9AY Phased array.
At the same time i will ask for a EWE possible problem.
I mounted a EWE antenna last summer, but could not get it to work.
after some Google etc i have found that the EWE antenna are very critical to
ground.
Some Hams mention that they use a ground wire under the antenna.
Is this wire just put on the ground, or is it connected to the feed point
ground and also @ the far end (reistor end) ground.
Any suggestion on this one.
73 de Rune LA7THA
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|