Topband
[Top] [All Lists]

Re: Topband: Caribbean Operations On 160m?

To: Steve Harrison <k0xp@k0xp.com>, "topband@contesting.com" <topband@contesting.com>, GEORGE WALLNER <aa7jv@atlanticbb.net>
Subject: Re: Topband: Caribbean Operations On 160m?
From: Wes Stewart via Topband <topband@contesting.com>
Reply-to: Wes Stewart <n7ws@yahoo.com>
Date: Tue, 13 Aug 2024 12:32:47 +0000 (UTC)
List-post: <mailto:topband@contesting.com>
 Understood. At least I got you on 40CW and 60m last night.

    On Monday, August 12, 2024 at 10:47:35 PM MST, GEORGE WALLNER 
<aa7jv@atlanticbb.net> wrote:  
 
 
Wes,

Schedules are very hard to follow. We needto work the bands that are good and 
work them as long as they are open. Propagation has been so erratic the last 
fewdays that all that is unpredictable. Hopefully by tomorrow things will 
settle down.

GL,

George

 

 

On Tue, 13 Aug 2024 00:58:56 +0000 (UTC) Wes Stewart wrote:



George,
 

 

You've prettymuch staked out 7056+ for SFH.  If you're on CW you won't be using 
that for FT8, why not use it for CW?



On another note, I would like to get you on 80 and160 FT8 to fill out my Bingo 
card. I'm sure I'm not alone.  But I keep rolling out of bed at 2AM to check 
160 onlyto find that I missed you on 80 at 1AM.  Could you give us a schedule 
of some kind for these bands? (I need tomanually retune my one antenna and I'm 
not about to go out to the cactus patch in the dark and disturb the 
rattlesnakesat their mealtime)



Thanks, keep up the goodwork.



Wes  N7WS







 
  On Monday, August 12, 2024 at 05:18:05 PM MST, GEORGE WALLNER 
<aa7jv@atlanticbb.net>wrote: 
 
 
 
 
 
 
 
Steve,40 m has been a problem at N5J. Often we have S9+20 dBover-the-horizon 
radar signal blanketing from 6.95 to 7.050 for hours at a time. We are 
considering operating at 7050,but that is very close to the FT8 frequencies. We 
hope to find a break in the QRM to work NA.GL and 73,GeorgeN5J Team
 

 

 


 
  
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
<Prev in Thread] Current Thread [Next in Thread>