Topband
[Top] [All Lists]

Re: Topband: YCCC 9 circle/5 square

To: topband@contesting.com
Subject: Re: Topband: YCCC 9 circle/5 square
From: W0MU Mike Fatchett <w0mu@w0mu.com>
Date: Wed, 20 Feb 2019 15:34:41 -0700
List-post: <mailto:topband@contesting.com>
Did DXE not sell enough of these to continue?  It appears the PI4CC  folks are reworking the controller as the page says QRX.

On 2/20/2019 2:37 PM, Mike VE3CKO wrote:
There seems to be no controller board available, just the pre-amp, switching and phasing boards. Did I miss something?

   RX-amps, you will get 10 pieces for 20 euro.
   Switch-board you will get 5 pieces for 20 euro.
   Phase board you will get 5 pieces for 20 euro.

   https://www.pi4cc.nl/tech-info/rx-array/iwantone/

If your putting an order together, count me to split up.

73, Mike Kovacich - VE3CKO

On 2/19/2019 2:03 PM, David Olean wrote:
Mike,

You can get boards from PI4CC HF club in the Netherlands. The problem is that you get more boards than one person needs. The boards are coming from China. I think it is a shipping situation. You can get 10 preamp boards and then five of the switching/phasing boards and five of the controller board.  I am looking to pool an order for a nine circle array, so I need ten preamps (one spare) and a single switcher and a single controller. I don't want or need five!  Even splitting it two ways is a good deal for the cost.  (20 EU for five ) Check out the page.

https://www.pi4cc.nl/tech-info/rx-array/controller/


Dave K1WHS

On 2/19/2019 5:40 PM, Mike VE3CKO wrote:
I see the YCCC 9 circle/5 square kits are no longer available from DX Engineering. Is there somewhere to buy the kits or at least some key parts like the PCBs?



_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
<Prev in Thread] Current Thread [Next in Thread>