Topbanders,
i'm preparing DL0WH for the upcoming contests and will replace the
single wire na-beverage with a two wire reversible beverage using
twisted wire.
According to http://www.w0btu.com/Beverage_antennas.html the feedline
shields should be kept seperated at the feedpoint.
Questions:
Should they be kept seperated at the shack end also, like the unused
feedline not connected to anything?
Should i terminate the unused feedline at the shack end and/or at the feed?
If i use only one feedline, should i disconnect both output wires of the
unused transformer?
Or should i terminate the unused transformer?
Thanks in advance.
--
Ohne CW ist es nur CB..
73, Martin DM4iM
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|