A lil late to the bar regarding this thread, but my first phasing type rotten
qrn reducer was an iteration of W1FB's 'QRN Squasher'
that he wrote about around 1996. In 1997 I also bought (and use to this day)
the mfj-1025. Both devices have worked great for me
on 160/80/40m, with an edge toward the mfj when using two beverages.
https://www.google.com/search?q=w1fb+qrn+squasher
de N8UX
----- Original Message -----
From: "Pete Smith N4ZR" <pete.n4zr@gmail.com>
To: "topband" <topband@contesting.com>
Sent: Sunday, October 9, 2022 10:23:27 PM
Subject: Re: Topband: QRM Eliminator
Funny (I guess) - we have Chinese manufacturers cloning a Russian design.
73, Pete N4ZR
Check out the new Reverse Beacon Network
web server at<https://reversebeacon.net>.
For spots, please use your favorite
"retail" DX cluster.
On 10/9/2022 12:35 PM, K4SAV wrote:
> This link shows a schematic of this thing. (Assuming it's the same as
> the packaged version.)
> https://tinyurl.com/3pkvzdft
>
> Jerry, K4SAV
>
> On 10/9/2022 10:59 AM, Tree wrote:
>> Looks like there is a low cost version of the ANC-4 and MFJ-1026 type of
>> noise eliminator available on Amazon of all places.
>>
>> Search for QRM Eliminator. Cost is around $60.
>>
>> These are useful if you have a single point noise source. I do not
>> have
>> one of these units but was "reading the mail" on someone talking
>> about it
>> on 40M SSB and they seemed to think it worked well.
>>
>> And he had a good point - if you don't like it - you can send it back
>> for a
>> full refund!
>>
>> Tree N6TR
>> _________________
>> Searchable Archives: http://www.contesting.com/_topband - Topband
>> Reflector
>
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband
> Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|