Frank, Jim, et al,
Ok great. I hope the problem is solved.
Happy Easter
73 Hardy N7RT
-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of
donovanf@starpower.net
Sent: Friday, April 03, 2015 4:40 PM
To: topband@contesting.com
Subject: Re: Topband: MFJ 259B
http://www.w8ji.com/mfj-259b_calibration.htm
----- Original Message -----
From: "Jim Brown" <jim@audiosystemsgroup.com>
To: topband@contesting.com
Sent: Friday, April 3, 2015 11:35:48 PM
Subject: Re: Topband: MFJ 259B
On Fri,4/3/2015 4:27 PM, Hardy Landskov wrote:
> My 259B seems to have drifted for lack of a better term. A 100 ohm
> resistor now measures 85 ohms. There are some trim pots inside but no
> directions on how to adjust them or align the unit.
>
> Should I send it back or ???
W8JI published some alignment instructions on his website. I found and used
them about eight years ago.
73, Jim K9YC
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|