TenTec
[Top] [All Lists]

[TenTec] Re: Try "PB BLASTER" for dirty PS connectors

To: <tentec@contesting.com>
Subject: [TenTec] Re: Try "PB BLASTER" for dirty PS connectors
From: SEWATKINS@dgs.state.va.us (Sherrill WATKINS)
Date: Mon, 13 Mar 2000 11:27:33 -0500
Ten Tec Fan's:   DeoxIT is an excellent product.  Unfortunately,  is expensive 
and can be difficult to locate.   I have had good results cleaning electrical 
controls, contacts and switches using a new special penetrating catalytic 
lubricant sold nationwide at automobile parts stores such as NAPA.  The name of 
the product is PB BLASTER.    It is intended for professional use and an 
approximate 15 ounce spray can is only a few dollars.  I have tried it on 
several volume controls and switches on both hollow  and solid state equipment 
and it worked great!  However, don't breath the vapor and be careful applying 
it as it can squirt with a strong force and can flood your work if one is 
careless.  It will really penetrate rusty bolts and nuts like nothing I have 
ever used!   It works well on frozen set screws on knobs.   Apparently, this 
same chemical action works great for removing oxidation on electrical contacts. 
 -  Sherrill  Watkins  K4OWN.

>


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>