Check those little relays on the A0 board. I had 100w out on the meter, but 0w
at the connector. If you don't have a built in tuner. there's a short jumper
that carries rf as well.Good luck.VanW7IEX
Sent from my Verizon Wireless 4G LTE smartphone
-------- Original message --------
From: Stuart Rohre <rohre@arlut.utexas.edu>
Date: 08/10/2015 13:18 (GMT-08:00)
To: tentec@contesting.com
Subject: Re: [TenTec] Power output down on Orion
Start with antenna connector and look for cracked solder joints in the
RF output path. Especially at the driver and finals.
GL,
Stuart Rohre
K5KVH
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|